CCD/2 MTC
The Bungard CCD/2/MTC is a high quality Computer Controlled Drilling machine with semi-automatic tool change. In contrast to the CCD/MTC the CCD/2 has a half sized work area (325 x 270 compared to 325 x 495mm) and an integrated control unit underneath the table.
Compared to the ATC models, the software interrupts the operation during the tool change and the new tool is changed manually (turning the knob changes by a quarter turn; motors remain empowered and hold the position).
The CCD/2 has the same robustness and precision as all the other CCD models. It is ideal as an entry-level model for isolation milling. If you want to operate the CCD/2 with cooling, you need to protect the control unit from the cooling. Please contact us beforehand.
TECHNICAL DATA
- Power supply: 110-240 V, 50-60 Hz + vacuum cleaner (1500W)
- Range of RPM: 5.000 – 63.000
- Traveling speed: 1 – 9000 mm/min
- Resolution: 0,01 µm
- Step resolution: Software selectable: 1 mil, ½ mil, ¼ mil, 1/8mil, optional: 1/16mil + 1/32mil
- Tool diameter: 0.1 mm – 3,175 mm (recommended, bigger tool diameter possible)
- Position accuracy: 3,2µm
- Maximum position speed per axis: 9000/mm/min (=150 mm/s)
- Maximum working speed per axis: 9000/mm/min (=150 mm/s), individual setting on a per-tool basis, independent from position speed
- Drill speed: 5/s (= 18.000 holes/h = 300 holes/min)
- Required accessories: Computer
- Board fixation: span fixing, clamp fixing, reference pin system, stack processing possible
Option: vacuum fixation
Đánh giá
Chưa có đánh giá nào.