CCD MTC

The Bungard CCD/MTC is a high quality computer controlled drilling and milling machine with semi-automatic tool change (MTC = manual tool change).

The CCD/MTC differs from the CCD/2 by a larger working area (325×495 mm in contrast to 270×325 mm) and by a separate controller.

Compared to the ATC models, the software interrupts the operation during the tool change and the new tool is changed manually (turning the knob changes by a quarter turn; motors remaine empowered and hold the position).

With the sturdy spindle and the good fixation of the tool in the chuck the Bungard CCD / MTC is perfectly fi tted for routing or engraving plastics, aluminium and other metals. 19 inch rack boards can also be processed.

TECHNICAL DATA

• Power supply: 110-240 V, 50-60 Hz + vacuum cleaner (1500 W)
• Range of RPM: 5.000 – 63.000
• Traveling speed: 1 – 9000 mm/min
• Resolution: 0,01 µm
• Step resolution: Software selectable: 1 mil, ½ mil, ¼ mil, 1/8mil, optional: 1/16mil + 1/32mil
• Tool diameter: 0.1 mm – 3,175 mm (recommended, bigger tool diameter possible)
• Position accuracy: 3,2µm
• Maximum position speed per axis: 9000/mm/min (=150 mm/s)
• Maximum working speed per axis: 9000/mm/min (=150 mm/s), individual setting on a per-tool basis, independent from position speed
• Drill speed: 5/s (= 18.000 holes/h = 300 holes/min)
• Required accessories: Computer
• Board fixation: span fixing, clamp fixing, reference pin system, stack processing possible
  Option: vacuum fixation