For quick INFORMATION and SUPPORT . Please contact us via our hotline or email


In Stock


  • Hàng chính hãng, mới 100%
  • Cung cấp hóa đơn GTGT, CO, CQ theo yêu cầu
  • Chính sách bảo hành tiêu chuẩn của hãng
  • Giao hàng toàn quốc
  • Hỗ trợ tư vấn, kỹ thuật 24/7

Liên hệ báo giá

 LaserPro 3000

Bungard Laser Direct Imaging (LDI)


The Bungard laser unit is an add-on-item for the Bungard CCD to expose photoresists, solder masks and Alucorex. The laser is mounted into the spindle holder instead of the high frequency spindle and is controlled by the RoutePro 3000 software. The Bungard laser exposure unit is an answer to the demand of many operators for higher precision, faster processing speeds and reduced tool costs, as it is the case for example with isolation milling.

As a result, it is possible to switch from isolation milling to wet processing without the exposure unit and photoplotter.

Please note that this inexpensive add-on gives excellent results for prototypes, but due to its technology, it is much slower than an industrial direct imager.

Converting Gerber to HPGL works best when macros and polygons are avoided when making the Gerber export from your design software.




  • a Bungard CCD
  • the Software RoutePro 3000
  • a laser licenseLaserPro 3000 (scope of delivery laser license)
  • a switch box to connect laser to the CCD (scope of delivery laser license)
  • a laser exposure head




To use the laser functions you need to connect the laser to the CCD and activate a laser license. The laser moves similar to routing along HPGL vectors. With the travelling height the line width and with laser intensity and travelling speed the exposure intensity is defined.

We recommend to adjust the step resolution to one eight in the software RoutePro 3000.




The laser exposure unit may only be used in connection with a CCD.
The laser can only be switched on, when it is correctly installed into the spindle holder of the CCD.
The laser itself has a power 120 mW and is classified as laser class 3B.
The laser is set into the CCD in a way, which makes it impossible to look directly into the laser light.
Note: the laser exposure unit may only be operated in a closed rack or hood.
Please observe the general rules for handling electronic parts, especially ESD-protection.
Before touching the laser head, perform a potential compensation.
E.g put you both hands on an ESD-suitable support before removing the laser from the package.
You need to do the same, before you reassemble the laser from the machine.
By bad conditions like, PVC flooring and shoes with plastic soles, high static charges can occur.
These could damage the laser head.




  • Laser class: class 3B
  • Power: 120mW
  • Dimensions (LxWxH): 47 x 47 x 110 mm
  • Safety:
    • Magnetic safety switch; laser turns on only if the unit is mounted facing downward into the CCD holder
    • PVC-protection cover with door switch and fi lter screens recommended
  • Power connection: Via Bungard CCD
  • Control: Via Bungard CCD/RoutePro3000
  • Requirements:
    • Bungard CCD
    • Software RoutePro 3000
    • Laser-Lizenz für RoutePro 3000
  • Application:: Exposure by UV-laser diode; wave length approx. 406 nm; suitable for positive- and negative photoresist, solder mask and Alucorex
  • Travel speed: (depending on resolution and type of photoresist:) 100mm – 10.000mm/min. Average speed: 1.000 mm/min
  • Line resolution: typically and specified: 50 – 1000 µm, max. possible 25 – 3000 µm

Đánh giá

Chưa có đánh giá nào.

Write a review

Email của bạn sẽ không được hiển thị công khai.

Back to Top
Product has been added to your cart