For quick INFORMATION and SUPPORT . Please contact us via our hotline or email

Search

In Stock

RMP

  • Hàng chính hãng, mới 100%
  • Cung cấp hóa đơn GTGT, CO, CQ theo yêu cầu
  • Chính sách bảo hành tiêu chuẩn của hãng
  • Giao hàng toàn quốc
  • Hỗ trợ tư vấn, kỹ thuật 24/7
  E-manual RMP (48 downloads)

Liên hệ báo giá

RMP

 

 

This high performance multilayer press was designed for PCB labs to enable quick prototyping of multilayer PCBs according to industry standards.

HNumber of layers is only limited by the maximum lift of the press plates (38 mm). Using separating metal sheets one can press a couple of boards over each other at the same time.

A compact and floor standing aluminium rack contains all parts of the unit including pressure supply, press plates and heaters.

The large loading door allows quick and easy access to the press chamber and is of course security switch protected.

A compressor, which is integral part of RMP 210 / RMP 3545 is stored in the back of the machine.

In the front, you will find additional storage room for tools or boards (lower door).

The unit is controlled by two digital and adjustable thermostates, one digital timer as well as a pressure valve with pressure meter.

Four strong air ventilators are activated automatically during cooling cycle.

RMP 210

 

  • Board size: brutto: 250 x 350 mm, netto: 210 x 300 mm
  • Pressure: > 12 t
  • Temperature: up to 250°C free adjustabler (max 300°C as an option)
  • Heating up: approx.30 min.
  • Pressure time: approx. 60 min.
  • Cooling down: approx. 120 min.
  • Weight: approx. 130 kg
  • Power supply: 230 V~, 50 Hz, 16 A
  • Dimensions (BxWxH): 650 x 650 x 1390 mm

RMP 3545

 

  • Board size: brutto: 350 x 450 mm, netto: 300 x 400 mm
  • Pressure: > 24T
  • Temperature: up to 250°C free adjustabler (max 300°C as an option)
  • Heating up: approx.30 min.
  • Pressure time: approx. 60 min.
  • Cooling down: approx. 120 min.
  • Weight: approx. 260 kg
  • Power supply: 4000 V~, 50 Hz, 32 A
  • Dimensions (BxWxH): 830x870x1600 mm

FEATURES

 

Steps of multilayer production:

  • Boards are pinned and stack is inserted into press plates.
  • Pressure is created.
  • Heater is activated.
  • Heating up procedure.
  • Press procedure at preset temperature.
  • Cooling down under pressure.
  • PCB stack is taken out of the machine.

The entire sequence will take approx. 3 hours if you start at 20°C and take out the PCBs at a temperature of 30°C. If you take up protective measures, you can remove the boards at higher temperatures and insert a new stack. This way the press cycle reduces to approx. 45 min. Gross size of the PCBs is 250 x 350 mm (or 350 x 450 mm) which corresponds to a PCB net size of 210 x 300 mm (or 300 x400 mm).

To register the layers of your multilayer you can use the register hole function of our software IsoCam and the Bungard Favorite fixes the layers with rivets.

VACUUM OPTION

 

  • Board size: gross 250 x 350 mm, net approx. 210 x 300 mm
  • Vacuum: approx. -0.7 bar
  • Temperature: up to 250°C free adjustable (max 300°C as an option)
  • Cooling down: approx. 120 min.
  • Dimension press plates: approx. 401 x 320,5 mm\
  • Weight: approx. 8 kg press plates, approx. 2 kg vacuum unit
  • Power supply: 230 V 50 Hz 100 W

 

RMP 210 - Multilayerpresse   Multilayerpresse  Multilayerpresse  Multilayerpresse

Multilayerpresse    Multilayerpresse  RMP 210 - Multilayerpresse  RMP 210 - Multilayerpresse

Macro
DOWNLOAD

Đánh giá

Chưa có đánh giá nào.

Write a review

Email của bạn sẽ không được hiển thị công khai.

Back to Top
Product has been added to your cart