For quick INFORMATION and SUPPORT . Please contact us via our hotline or email


In Stock


  • Hàng chính hãng, mới 100%
  • Cung cấp hóa đơn GTGT, CO, CQ theo yêu cầu
  • Chính sách bảo hành tiêu chuẩn của hãng
  • Giao hàng toàn quốc
  • Hỗ trợ tư vấn, kỹ thuật 24/7
  E-manual Splash/Splash XL (41 downloads)

Liên hệ báo giá

Splash Center/Splash Center XL



Laboratory etching machine with static and spray rinse, integrated developer tank, a reserve tank for e.g. chemical tinning and a squeeze dryer. The Splash-Center is suitable for double-sided PCBs. Special emphasis was put on ergonomical and clean etching and rinsing as well as on low chemical drag out.
A typical workflow for example is to use tank 1 (spray compartment) for etching, tank 2 and 3 for rinsing, tank 4 (with centrifugal pump) for developing and tank 5 for tinning.



  • Maintenance free etching system with solid stream nozzles
  • Etching speed of 35 µm Cu within 90 seconds (warm Fe-III-Cl).
  • Big window to the etching chamber made from transparent PVC.
  • Maximum board size: 210 x 300 mm /Splash-Center XL: 300 x 400
  • Line resolution better than 0.1 mm (100 µm)
  • Suitable for all common etchants. Fe-III-Cl recommended
  • Lid to the etching chamber with safety switch
  • Removable board holder made from Titanium and PVC. Can be locked in drip-off position
  • Easy access to the etching chamber.
  • Strong 1000 W Quarz heater, etching temperature controlled by thermostat
  • Overheat fuse
  • Digital timer with count down, auto reset and beeper
  • Integrated rinsing zone with drip off holder.
  • 5 ball valves for all tanks
  • Suitable for spray developing



  • Magnetic centrifugal pump to revolve developer
  • two integrated static rinses, one can be used for neutralization purposes
  • Fresh water spray zone activated by foot switch, including splash protection
  • A reserve tank, e.g. for immersion tin



  • 5 ball valves to drain all tanks, cover protected from the front side.
  • All tanks with lids
  • Integrated drip tray for all tanks, sure-footed about 120 mm above the ground
  • Integrated mechanical squeeze dryer



  • Power supply: 220 V~, 50 Hz, approx. 1,5 kW
  • Dimensions (LxWxH): 1000 x 670 x 1200 mm
  • Working Level: 900 mm
  • Etchingformat: 210 x 300 mm
  • Tank capacity: 1 x 25L + 1 x 9L + 3 x 7L
  • Weight: approx. 46 kg



  • Power supply: 220 V~, 50 Hz, approx. 1,5 kW
  • Dimensions (LxWxH): 1160 x 770 x 1200 mm
  • Working Level: 900 mm
  • Etching format: 300 x 400 mm
  • Tank capacity: 1 x 40L + 1 x 24L + 3 x 15L
  • Weight: approx. 56 kg



E-manual Splash/Splash XL (41 downloads)

Đánh giá

Chưa có đánh giá nào.

Write a review

Email của bạn sẽ không được hiển thị công khai.

Back to Top
Product has been added to your cart