For quick INFORMATION and SUPPORT . Please contact us via our hotline or email


In Stock


  • Hàng chính hãng, mới 100%
  • Cung cấp hóa đơn GTGT, CO, CQ theo yêu cầu
  • Chính sách bảo hành tiêu chuẩn của hãng
  • Giao hàng toàn quốc
  • Hỗ trợ tư vấn, kỹ thuật 24/7
  E-manual Sprint3000 (42 downloads)

Liên hệ báo giá




Sprint – that is an innovative and modular system of horizontal, conveyorized spray etching. Suitable for all acid and alkaline etchants. New! The Sprint (3000/4500/6000) series is made for double sided PCBs with line resolution down to better than 0,1 mm. Machine is available as table top or floor standing version. With this range of products, complete production lines are possible covering developing, etching and rinsing including waste water treatment.
Outstanding feature is the transport unit, which is fully removable for cleaning purposes and may be extended or shortened almost arbitrarily, and thus allows custom changes or machine designs. Standard machine has a width of 300mm (SPRINT 3000) but wider machines are available (450mm=Sprint 4500 / 600mm =Sprint 6000).


  • Small footprint, easy handling, control panel at the front
  • Service friendliness: All nozzles with self-adjusting Bayonet Lock: no readjustment!
  • Transport: the complete transportation unit can be easily taken out of the machine for cleaning and is based on a maintenance-free bevel gear system (titanium-PP) with horizontal gear shaft
  • Transport speed infinitely variable from 0-2m/min
  • Short etching time and high etching precision due to high end spray nozzles arranged in nozzle bar
  • Machine equipped with filter for etchant
  • Titanium heater, controlled by digital thermostat with function control
  • Integral closed loop rinse plus fresh water rinse, upon request also with motion detector
  • Clean and easy emptying of all tanks via cock valves
  • Security features: cover switch and emergency stop



  • Dimension (LxWxH): 1100 x 670 x 750 mm
  • Working width: 300 mm
  • Power supply: 230 V, 50 Hz, 1,5 kW
  • Tank capacity: 20 Liter (etchant), 15 Liter (close loop rinse)
  • Weight: approx. 95 kg
  • Water output: approx. 80 l/min brutto
  • Spray pressure: approx. 1 bar
  • Working temperature: 0 – 45 °C



  • Working width: 450 mm / 600 mm for Sprint 4500/6000
  • Sensor control for fresh water rinse (motion control)
  • Additional suction hood, swiveling
  • Upper / lower pressure adjustable via cog valve
  • Additional rinsing sections possible
  • Etching zone can be enlarged to 2x / 3x / 4x length
  • High pressure pump for rinsing
  • Titanium cooling coil, electrically controlled to reduce bath temperature in case of danger of exothermically reaction
  • Run dry protection (double security for heater elements)
  • Underframe with or without security tray
  • Transmitting height up to 10mm (e.g. for pad printing clichés)
  • Can be supplied with waste water treatment unit
  • Oscillation module possible



E-manual Sprint3000 (42 downloads)

Đánh giá

Chưa có đánh giá nào.

Write a review

Email của bạn sẽ không được hiển thị công khai.

Back to Top
Product has been added to your cart