For quick INFORMATION and SUPPORT . Please contact us via our hotline or email


In Stock


  • Hàng chính hãng, mới 100%
  • Cung cấp hóa đơn GTGT, CO, CQ theo yêu cầu
  • Chính sách bảo hành tiêu chuẩn của hãng
  • Giao hàng toàn quốc
  • Hỗ trợ tư vấn, kỹ thuật 24/7

Liên hệ báo giá



 1) The same platform as printer can be selectable,easy to locate both single and double sides of PCB board,high flexibility ensure high printing precision;

2) The steel stencil can be rotated 30 degrees at most,and the precision can be kept all the way when repeat works,can be comparable with automatic machine;

3) Using the way of steel stencil movement to adjust the best position,combining with the fine adjustment of X-axis、Y-axis to correct,convenient and efficient;

4) The frame made of thickened sheetmetal,finest material,good quality with  outstanding durability;the brackets using the  bolt bar to adjust the height,convenient for controlling the thickness of PCB 

Technical parameters

ModelNeoDen 3040
Kích thước580×320×260(mm)
Khổ làm việc300×400(mm)
Kích thước PCB250×300(mm)
Kích thước Stencil370×470(mm)
Tốc độ inKiểm soát bởi người
Chiều dầy PCB0~100(mm)
Dài điều chỉnh PCBTrước / Cạnh +10mm
Chiều cao180(mm)
Độ chính xác lặp lại±0.01mm
Căn độ chính xácBên ngoài/ Lỗ định vị
Dải vi điều chỉnhZ-axis ±45mm  X-axis ±35mm  Y-axis ±45mm
Trọng lượng14Kg


 1) Check if the four foot pad cling the ground before operating,to ensure the printer smooth and steady without shaking;

2) Clean all the accessories of platform such as thimble, fixation unit and filler;

3) Confirm the workpiece,PCB boards and steel stencil which need to print

Operate it according to the following instructions step by step after everything has been gotten ready:

 A. PCB Positioning

View the position between PCB board and the steel stencil,find out the most suitable position to locate the PCB board on the platform,Suggestion:paste a bit double sides adhesive tape to stick the PCB well if the position between PCB and steel stencil confirmed→install the steel stencil on the locating slot of the frame→paste more double sides adhesive tape on the reverse side of PCB board than steel stencil→then pressing the steel stencil→install the filler in the appropriate place between platform and PCB board→adjust the distance between the steel stencil and filler till the same thickness as PCB board(anastomose the PCB and filler),to ensure the PCB board and filler is parallel→tear the paper of double sides adhesive tape which pasted previous on the PCB board→close the steel stencil till the PCB board cement with the filler→lift the steel stencil→the PCB separate from the steel stencil and paste together in the filler of platform→find out the applicable positioning pin and install them into the fixation unit(the height of positioning pin do not exceed the thickness of PCB board)→lock the fixation unit tightly on the platform after positioning pin installed into the fixation unit with fastening,the PCB positioning operation almost finished→adjust the best position between platform and PCB board by using the  X-axis adjustment handle and Y-axis adjustment handle

B. Printing

Choose the suitable scraper blade(depends on the width of printing) when printing,keep the screws tight of whole printer(specially note the ones of steel screen),otherwise it will influence the printing precision.The thickness of solder paste depends on the printing strength,an expert and excellent operator can reach the same effect as the automatic machine,it means the operator is one of the important point for printing quality.The above process is the best experience gain from our engineer and customers during practical using since a long time for your reference.Please kindly inform us if any better process and  experience to improve the  performance,convenient for customer high-efficiency production.

Đánh giá

Chưa có đánh giá nào.

Write a review

Email của bạn sẽ không được hiển thị công khai.

Back to Top
Product has been added to your cart